HomeFree filet patterns › Blossom and Bud Insertion Repeat

Blossom and Bud Insertion Repeat

A five-petal blossom with a bud and leaves sits on a diagonal stem between paired solid rails, charted as one square repeat. Worked side by side, the repeats build a straight band the source book shows as an insertion, suited to towel ends or a curtain edge. The rails are continuous filled mesh, and a handful of squares sit just outside the square outline, so mind the shaped edge at the sides of the repeat.

Filet crochet chart: square repeat of a five-petal blossom with bud and leaves on a diagonal stem, framed by paired solid horizontal rails.

VINTAGE · 1914 EDGINGS & BORDERS

Chart size34 × 34 meshes
Worked rows34
Stitches usedch, dc — that's all
DifficultyAdvanced
Written rowsevery row, with per-row shaping
SourcePriscilla Filet Book No. 2, 1914

Download chart (SVG) Start crocheting

Restored, not scanned. Shaped chart — the row edges step in and out. Every row that changes width carries a [Shaping: …] note saying how many meshes wider or narrower it is at its start and end, read straight off the chart. Finished size depends on your thread and tension — swatch first.

Left-handed? These rows are written for right-handed working (odd rows read right to left). Reverse the reading direction of every row, or use the chart maker, which writes the pattern left-handed for you.

Written instructions

How to count. The turning chain at the start of a row stands in for the first stitch of that row's first mesh, and that mesh is already included in the counts below — work only what the counts say, not one mesh more.
Row 1: 34 open meshes (34 meshes in total). Turn.
Row 2: ch 3, 34 filled meshes. Turn.
Row 3: ch 5, 34 open meshes. Turn.
Row 4: ch 5, 34 open meshes. Turn.
Row 5: ch 3, 34 filled meshes. Turn.
Row 6: ch 5, 34 open meshes. Turn.
Show all 34 rows
Row 1: 34 open meshes (34 meshes in total). Turn.
Row 2: ch 3, 34 filled meshes. Turn.
Row 3: ch 5, 34 open meshes. Turn.
Row 4: ch 5, 34 open meshes. Turn.
Row 5: ch 3, 34 filled meshes. Turn.
Row 6: ch 5, 34 open meshes. Turn.
Row 7: ch 5, 34 open meshes. Turn.
Row 8: ch 5, 9 open meshes, 3 filled meshes, 22 open meshes. Turn.
Row 9: ch 5, 7 open meshes, 3 filled meshes, 6 open meshes, 3 filled meshes, 2 open meshes, 4 filled meshes, 1 open mesh, 2 filled meshes, 6 open meshes. Turn.
Row 10: ch 5, 5 open meshes, 8 filled meshes, 1 open mesh, 4 filled meshes, 5 open meshes, 4 filled meshes, 6 open meshes. Turn. [Shaping: ends 1 mesh narrower than the row before.]
Row 11: ch 5, 7 open meshes, 5 filled meshes, 3 open meshes, 6 filled meshes, 1 open mesh, 8 filled meshes, 4 open meshes. Turn. [Shaping: starts 1 mesh wider than the row before.]
Row 12: ch 5, 4 open meshes, 8 filled meshes, 1 open mesh, 6 filled meshes, 2 open meshes, 3 filled meshes, 1 open mesh, 2 filled meshes, 7 open meshes. Turn.
Row 13: ch 5, 2 open meshes, 3 filled meshes, 3 open meshes, 2 filled meshes, 1 open mesh, 2 filled meshes, 1 open mesh, 8 filled meshes, 1 open mesh, 5 filled meshes, 6 open meshes. Turn.
Row 14: ch 5, 3 open meshes, 3 filled meshes, 1 open mesh, 13 filled meshes, 2 open meshes, 3 filled meshes, 7 open meshes, 1 filled mesh, 1 open mesh. Turn.
Row 15: ch 3, 1 filled mesh, 9 open meshes, 1 filled mesh, 1 open mesh, 1 filled mesh, 2 open meshes, 6 filled meshes, 3 open meshes, 2 filled meshes, 1 open mesh, 5 filled meshes, 1 open mesh, 1 filled mesh. Turn.
Row 16: ch 5, 1 open mesh, 8 filled meshes, 2 open meshes, 2 filled meshes, 1 open mesh, 4 filled meshes, 1 open mesh, 2 filled meshes, 13 open meshes. Turn.
Row 17: ch 5, 6 open meshes, 2 filled meshes, 6 open meshes, 2 filled meshes, 3 open meshes, 1 filled mesh, 1 open mesh, 3 filled meshes, 1 open mesh, 6 filled meshes, 3 open meshes. Turn.
Row 18: ch 5, 2 open meshes, 7 filled meshes, 1 open mesh, 2 filled meshes, 2 open meshes, 4 filled meshes, 2 open meshes, 3 filled meshes, 4 open meshes, 2 filled meshes, 5 open meshes. Turn.
Row 19: ch 5, 5 open meshes, 2 filled meshes, 2 open meshes, 2 filled meshes, 3 open meshes, 7 filled meshes, 3 open meshes, 1 filled mesh, 1 open mesh, 6 filled meshes, 2 open meshes. Turn.
Row 20: ch 5, 3 open meshes, 4 filled meshes, 1 open mesh, 12 filled meshes, 5 open meshes, 1 filled mesh, 1 open mesh, 1 filled mesh, 6 open meshes. Turn.
Row 21: ch 5, 4 open meshes, 4 filled meshes, 2 open meshes, 2 filled meshes, 3 open meshes, 6 filled meshes, 1 open mesh, 5 filled meshes, 1 open mesh, 2 filled meshes, 4 open meshes. Turn.
Row 22: ch 5, 6 open meshes, 7 filled meshes, 1 open mesh, 4 filled meshes, 5 open meshes, 3 filled meshes, 1 open mesh, 4 filled meshes, 3 open meshes. Turn.
Row 23: ch 5, 2 open meshes, 5 filled meshes, 2 open meshes, 1 filled mesh, 6 open meshes, 4 filled meshes, 1 open mesh, 8 filled meshes, 5 open meshes. Turn.
Row 24: ch 5, 5 open meshes, 8 filled meshes, 2 open meshes, 2 filled meshes, 11 open meshes, 5 filled meshes, 1 open mesh. Turn.
Row 25: ch 5, 1 open mesh, 4 filled meshes, 17 open meshes, 6 filled meshes, 6 open meshes. Turn.
Row 26: ch 5, 7 open meshes, 1 filled mesh, 1 open mesh, 2 filled meshes, 19 open meshes, 3 filled meshes, 1 open mesh. Turn.
Row 27: ch 5, 34 open meshes. Turn.
Row 28: ch 5, 34 open meshes. Turn.
Row 29: ch 5, 34 open meshes. Turn.
Row 30: ch 3, 34 filled meshes. Turn.
Row 31: ch 5, 34 open meshes. Turn.
Row 32: ch 5, 34 open meshes. Turn.
Row 33: ch 3, 34 filled meshes. Turn.
Row 34: ch 5, 34 open meshes. Fasten off.

Stitch along

Tick rows off as you go — progress is saved on this device only.

More from the 1914 collection

About these patterns. Crochetpatternmaker.com is an independent site. The vintage charts in our library are restored from The Priscilla Filet Crochet Book, No. 2 (Priscilla Publishing Company, Boston, 1914), a work in the public domain; we re-charted each design from the original plates and cross-checked it against the printed mesh counts. We are not affiliated with any past or present publisher. The chart maker runs entirely in your browser — images you upload never leave your device. Finished sizes are estimates: filet gauge depends on your thread, hook and tension, so work a small swatch first.